https://qt5201.org/api.php?action=feedcontributions&feedformat=atom&user=Aarthy+maniQT5201U wiki - User contributions [en]2026-10-30T10:08:36ZUser contributionsMediaWiki 1.46.0https://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=112Multi-tone RFSoC driver for an AOM2026-10-30T08:30:58Z<p>Aarthy mani: /* References */</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode — few tones (1–4) per channel, optimised for phase purity and deterministic inter-tone phase relationships.<br />
2) Atom mode — many tones (32–64) per channel, optimised for intermodulation suppression and linear frequency chirping.<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent ASIC implementation depending on the outcome<br />
<br />
== Background ==<br />
<br />
== Methods ==<br />
1) Include software packages, hardware resources<br />
<br />
== Results ==<br />
<br />
== Conclusion & Discussion ==<br />
<br />
==== References ====<br />
# [https://www.realdigital.org/downloads/d6a7543b5033e5dadde272a48bcb5090.pdf RFSoC 4x2 Reference Manual (Rev. A6)], Real Digital.<br />
# L. Stefanazzi ''et al.'', ''Rev. Sci. Instrum.'' '''93''', 044709 (2022), [https://arxiv.org/abs/2110.00557 arXiv:2110.00557].<br />
# [https://www.rfsoc-pynq.io/ RFSoC-PYNQ].</div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=111Multi-tone RFSoC driver for an AOM2026-10-30T08:29:50Z<p>Aarthy mani: /* References */</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode — few tones (1–4) per channel, optimised for phase purity and deterministic inter-tone phase relationships.<br />
2) Atom mode — many tones (32–64) per channel, optimised for intermodulation suppression and linear frequency chirping.<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent ASIC implementation depending on the outcome<br />
<br />
== Background ==<br />
<br />
== Methods ==<br />
1) Include software packages, hardware resources<br />
<br />
== Results ==<br />
<br />
== Conclusion & Discussion ==<br />
<br />
== References ==<br />
<references><br />
<ref name="rfsoc4x2-rm">{{cite web<br />
|title=RFSoC 4x2 Reference Manual, Revision A6<br />
|publisher=Real Digital<br />
|url=https://www.realdigital.org/downloads/d6a7543b5033e5dadde272a48bcb5090.pdf<br />
|format=PDF<br />
|access-date=2026-10-30}}</ref><br />
<br />
<ref name="qick">{{cite journal<br />
|last1=Stefanazzi |first1=Leandro<br />
|last2=Treptow |first2=Kenneth<br />
|last3=Wilcer |first3=Neal<br />
|display-authors=etal<br />
|title=The QICK (Quantum Instrumentation Control Kit): Readout and control for qubits and detectors<br />
|journal=Review of Scientific Instruments<br />
|volume=93 |issue=4 |page=044709 |year=2022<br />
|doi=10.1063/5.0076249<br />
|arxiv=2110.00557<br />
|url=https://arxiv.org/abs/2110.00557}}</ref><br />
<br />
<ref name="rfsoc-pynq">{{cite web<br />
|title=RFSoC-PYNQ<br />
|publisher=AMD University Program / Strathclyde<br />
|url=https://www.rfsoc-pynq.io/<br />
|access-date=2026-10-30}}</ref><br />
</references></div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=81Multi-tone RFSoC driver for an AOM2026-09-28T23:03:27Z<p>Aarthy mani: </p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode — few tones (1–4) per channel, optimised for phase purity and deterministic inter-tone phase relationships.<br />
2) Atom mode — many tones (32–64) per channel, optimised for intermodulation suppression and linear frequency chirping.<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent ASIC implementation depending on the outcome<br />
<br />
== Background ==<br />
<br />
== Methods ==<br />
1) Include software packages, hardware resources<br />
<br />
== Results ==<br />
<br />
== Conclusion & Discussion ==<br />
<br />
== References ==</div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=80Multi-tone RFSoC driver for an AOM2026-09-28T21:23:49Z<p>Aarthy mani: /* Objective */</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode — few tones (1–4) per channel, optimised for phase purity and deterministic inter-tone phase relationships.<br />
2) Atom mode — many tones (32–64) per channel, optimised for intermodulation suppression and linear frequency chirping.<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent ASIC implementation depending on the outcome<br />
<br />
== Introduction ==<br />
<br />
== Methods ==<br />
<br />
== Results ==<br />
<br />
== Discussion ==<br />
<br />
== Conclusion ==<br />
<br />
== References ==</div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=79Multi-tone RFSoC driver for an AOM2026-09-28T21:23:40Z<p>Aarthy mani: /* Objective */</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode — few tones (1–4) per channel, optimised for phase purity and deterministic inter-tone phase relationships.<br />
2) Atom mode — many tones (32–64) per channel, optimised for intermodulation suppression and linear frequency chirping.<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent ASIC implementation depending on the outcome<br />
<br />
== Introduction ==<br />
<br />
== Methods ==<br />
<br />
== Results ==<br />
<br />
== Discussion ==<br />
<br />
== Conclusion ==<br />
<br />
== References ==</div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=78Multi-tone RFSoC driver for an AOM2026-09-28T21:21:45Z<p>Aarthy mani: /* Objective */</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode --- few tones (1--4) per channel, optimised for phase purity and deterministic inter-tone phase relationships, as required for M{\o}lmer--S{\o}rensen gates.<br />
2) Atom mode --- many tones (32--64) per channel, optimised for intermodulation suppression and linear frequency chirping, as required for tweezer arrays and atom transport.<br />
<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent \SI{22}{\nano\meter} FDSOI ASIC.<br />
<br />
== Introduction ==<br />
<br />
== Methods ==<br />
<br />
== Results ==<br />
<br />
== Discussion ==<br />
<br />
== Conclusion ==<br />
<br />
== References ==</div>Aarthy manihttps://qt5201.org/index.php?title=Multi-tone_RFSoC_driver_for_an_AOM&diff=77Multi-tone RFSoC driver for an AOM2026-09-28T21:21:28Z<p>Aarthy mani: Created page with "'''Team member:''' Mani Aarthy == Objective == Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control. The synthesiser must support two operating modes on the same hardware: 1) Ion mode --- few tones (1--4) per channel, optimised for phase purity and deterministic inter-tone phase relationships, as required for M{\o}lmer--S{\o}rensen gates. 2) Atom m..."</p>
<hr />
<div>'''Team member:''' Mani Aarthy<br />
<br />
== Objective ==<br />
Design, implement, and characterise a multi-tone RF synthesiser on an RFSoC platform capable of driving AODs or AOMs used for trapped-ion and neutral-atom qubit control.<br />
<br />
The synthesiser must support two operating modes on the same hardware:<br />
<br />
1) Ion mode --- few tones (1--4) per channel, optimised for phase purity and deterministic inter-tone phase relationships, as required for M{\o}lmer--S{\o}rensen gates.<br />
2) Atom mode --- many tones (32--64) per channel, optimised for intermodulation suppression and linear frequency chirping, as required for tweezer arrays and atom transport.<br />
<br />
<br />
The FPGA prototype serves two purposes: it is a usable instrument in its own right, and it is the architectural and algorithmic testbench for a subsequent \SI{22}{\nano\meter} FDSOI ASIC.<br />
<br />
<br />
== Introduction ==<br />
<br />
== Methods ==<br />
<br />
== Results ==<br />
<br />
== Discussion ==<br />
<br />
== Conclusion ==<br />
<br />
== References ==</div>Aarthy manihttps://qt5201.org/index.php?title=Main_Page&diff=35Main Page2026-09-15T04:13:51Z<p>Aarthy mani: /* Project pages */</p>
<hr />
<div><strong>Wiki page for course QT5201U (Quantum control technology) - AY2026/27S1</strong><br />
<br />
This will be the place for documenting projects. To be able to write something to this wiki, we need to create a user login manually. If you have not yet created an account, do let me know - Christian.<br />
<br />
'''Next class:''' Mon 17 Aug 2026 in the seminar room S15 level 5.<br />
<br />
==Project pages==<br />
===[[Example project title]]===<br />
One sentence, describing what this project is is about.<br />
<br />
'''Team members:''' A, B, C<br />
<br />
<br />
=== [[QKD receiver characterization (Polarization)]] ===<br />
<br />
Calibrated polarization-state generator to characterize polarization analysis modules in QKD receivers and rigorously quantify the impact on secure key rates.<br />
<br />
'''Team members:''' Elias X. Huber, various AI agents (open to join forces with other humans as well, you can reach me at elias.x.huber[at typical nus sufix]; please note though that I will likely do the experiment at UTown (CREATE Tower), my schedule tends to be a bit inflexible for team-work, and I am a theorist with no lab experience).<br />
<br />
<br />
=== [[Control and measurement in the bosonic cQED system]] ===<br />
Using control and measurement methods to characterize a dispersively coupled single superconducting cavity and single transmon qubit system, with a thorough review of the theories and experimental techniques behind it.<br />
<br />
'''Team members:''' Grace Pang and Seungwon Jin<br />
<br />
===[[Multi-tone RFSoC driver for an AOM]]===<br />
A multi-tone RF synthesizer on an RFSoC board to drive an acousto-optic modulator(AOM).<br />
<br />
'''Team members:''' Mani Aarthy<br />
<br />
==Resources==<br />
Some hopefully useful references should go here.<br />
===Recommended literature===<br />
* Bahaa E. A. Saleh, Malvin Carl Teich: Fundamentals of Photonics, Wiley; available as [https://libproxy1.nus.edu.sg/login?url=https://search.ebscohost.com/login.aspx?direct=true&db=nlebk&AN=26193&site=ehost-live&ebv=EB&ppid=pp_Cover e-book in NUS]. Excellent reference book for many optics topics.<br />
===Recorded classes===<br />
<br />
{| class="wikitable"<br />
!Date !! Topic !! Description !! Reference<br />
<br />
|-<br />
| 17.8.2026<br />
| [https://youtu.be/tUuzyOVIlxk Paraxial ray optics]<br />
| A recap of how to deal with classical ray optics through ABCD matrices<br />
| Saleh, Teich: Fundamentals of Photonics <br />
<br />
|-<br />
| 18.8.2026<br />
| [https://youtu.be/lSKFl8u21_w Paraxial wave optics]<br />
| Working towards Gaussian beams found with lasers...<br />
| same as above<br />
<br />
|-<br />
| 24.8.2026<br />
| [https://youtu.be/2HZCak7ODlM Optical cavities 1]<br />
| Fabry-Perot, simple 1D dimensional<br />
| <br />
|-<br />
<br />
| 25.8.2026<br />
| [https://youtu.be/GEa3ktnrMrg Optical cavities 2]<br />
| Transverse mode structure, optical coating basics<br />
| <br />
<br />
|}<br />
Complete playlist: https://www.youtube.com/playlist?list=PLN-Fk1m9cTD4<br />
<br />
==Previous version of this course wiki==<br />
* AY2012S2: https://ay2021s2.qt5201.org<br />
<br />
== Getting started ==<br />
Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.<br />
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]<br />
* Math can be entered in LaTeX style: <code><nowiki><math>r^2=\sqrt{x^2+y^2}</math></nowiki></code> renders as <math>r^2=\sqrt{x^2+y^2}</math><br />
* Should you miss any module or functionality of this wiki, please contact me (Christian Kurtsiefer).</div>Aarthy mani